Chromium Corp.
(216) 271-4910
8701 Union Ave.
Cleveland, Ohio,
USA
44105
since the 1920's, electroplated hard chrome has been used as an economical and functional repair for many types of worn and damaged parts.
- Year Established:
- 1926
Products & Services
-
- Chromium
- Crodon
- Hard Chrome
- Chrome Plate
- Piston
- Liner
-
- Liners
- Pistons
- Valve
- Valves
- Wear Couple
Web Result
- Page 3
- Page 1 | Page 2 | Page 3 Q: What causes crazing? A: Chromium, as deposited, is generally under great stres,s and usually contains cracks of microscopic size. As produced, these cracks are in haphazard arrangement and vary as to number, size, and depth. Open cracks are often found in the surface of the plate; there are also sealed-over cracks below the surface. From the start of deposition, a stres...
- Oil & Gas Chromium Corporation
- CRODON Lining Trademarked by Chromium Corporation in the 1930s, the CRODON plating process is still recognized as the leading surface technology in the 21st century. CRODON lining resists wear to cylinder bores better than any other material available today. Wear to the cylinder bore is a function of the following five variables: Hardness: CRODON lining is the hardest available material appropriat...
- FAQs Chromium Corporation
- Page 1 | Page 2 | Page 3 Q: What differentiates Chromium Corporation s CRODON surface from conventional hard chrome? A: There are a number of significant differences. One important difference is the surface finish porosity is mechanically induced to give greater repeatability and control, allowing for highly controlled finished surfaces that are engineered for specific operating conditions. The ha...
- About Chromium Corporation
- Since the 1920s, electroplated hard chrome has been used as an economical and functional repair for many types of worn and damaged parts. Today, although challenged by new technologies, hard chrome continues to be the most effective and economical material to repair parts subjected to extreme forces. Chromium Corporation has been an important player in the evolution of electroplated hard chrome. M...
- Page 2
- Page 1 | Page 2 | Page 3 Q. Is Chromium Corporation approved by any OEMs? A: Yes, Chromium Corporation and our finishes are approved and specified by the many OEMs in the Rail, Marine, and Stationary Power and Gas Compression industries. Q: What is the hardness of your CRODON versus your competition? A: Chromium Corporation: CRODON minimum 1,000 Knoop 67-72 Rockwell C Competition: Range from 850 -...
Website Links:
Own this business?
Request to update the information