Simon Ellis Superabrasives, Inc.
(937) 226-0683
903 N. Keowee St.
Dayton, Ohio,
USA
45404
- Year Established:
- 1993
Products & Services
-
- Machine Tools
-
- Metal Cutting Types
Web Result
- Tip Sizes
- Our standard turning inserts are made with a CBN or PCD tip brazed to a carbide blank. The size of the tip is a significant factor in the cost of the insert, and determines the maximum depth of cut the tool can take. The three tip selections available as standard are shown as DT, 5 and 7 in this online catalog. DT stands for Double Tip. The tool has a small tip on opposing ends, providing two cutt...
- Small Indexable Boring...
- Catalog Small Indexable Boring Bars and Inserts Grooving and Profiling Inserts "Top Notch" Style Grooving Inserts Roll & Die Turning Tools Inserts Small Indexable "Heavy Metal" Boring Bars and Inserts Inserts available in CBN or PCD - All inserts are solid CBN or PCD un-brazed adding strength and chatter resistance All inserts have two cutting edges Insert grades available are: QRH08 - General...
- Re-tipping
- We are frequently asked about the feasibilty of re-tipping an insert, putting a new CBN or PCD tip on an insert. Normally, this is not practical. The cost of the carbide blank for most standard inserts is a small part of the total cost of the tool, and re-using old carbide usually requires more labor than the carbide is worth. In other words, we would have to charge more for a re-tipped tool than ...
- How to Order
- Please define Style, Size including Radius, Desired Grade and Tip Size. For example: Your order: CNMA 432 QRH08 - DT Translation: Product Style Size & Radius Material Grade Tip Size CNMA 4 3 2 QRH08 DT 80o 1/2" I.C. .187 T .031 R CBN Grade Double Tipped "Throwaway" Style If you are unsure of the type of tool or grade of material you need, give us a call. We are always happy to help with your C...
- Rebuilding vs. Regrinding
- When we rebuild a standard insert, we start by inspecting and gauging the tool. We check thickness, I.C., radius and extent of wear and damage. The tool is then taken to the brazing station where the insert is heated to the point where the brazed tip can be moved, and a bronze shim is inserted between the back edge of the tip and the carbide insert body. The size of the shim isdetermined by the am...
Website Links:
Simon Ellis Superabrasives, Inc. | "Top Notch" Style Grooving... | Grade Selection | Groove Tools | Grooving and Profiling Inserts | How to Order | Information Request | Inserts | Product Order Form | Radii | Rebuilding vs. Regrinding | Re-tipping | Roll & Die Turning Tools | Small Indexable Boring... | Tip Sizes
Own this business?
Request to update the information