custom manufacturer of knife gate valve with solid one piece cast body in corrosion resistant stainless steel. compact wafer configuration to tappi standard face to face. designed to handle dense mixtures of stock and slurry. non-clogging full port design available with or without resilient seat for two way drip tight shut off in sizes from 2 inches to 48 inches diameter. 150 psi working pressure. flanges match ansi b16.5-150 lb standard with all holes tapped.

Products & Services

• • Valve
  • Valves
  • Slurry Valves
  • Mud Valves
  • Pulp Valves
  • Paper Pulp Valves
  • Pulp Mill Valves
  • Sludge Valves
  • Abrasive Slurry Valves
  • Full Port Valves
  • Corrosive Resistant Valves
  • Stainless Steel Valves
  • High Alloy Valves
  • Tight Shut-off Valves
  • 2-way Shut-off Valves
  • Knife Gate Valves
  • Cylinder Operated Valves
  • Electric Motor Operated Valves
  • Throttling Valves
  • V-port Valves
  • Spring Return Valves
  • Automatic Close Valves On Air Failure
  • Bonnetless Valves
  • Power Shut-off Valves
  • Powder Shut-off Valves
• • Dry Particle Valves
  • Tank Shut-off Valves
  • Pulp Fiber Valves
  • Gate Valves
  • Pulp Mill
  • Sludge
  • Abrasive Slurry
  • Full Port
  • Corrosive
  • Stainless Steel
  • High Alloy
  • Tight Shut-off
  • 2-way Shut-off
  • Cylinder Operator
  • Electric Motor Operator
  • Throttling
  • V-port
  • Spring Return
  • Bonnetless
  • Dry Particle
  • Pulp Fiber
  • Slurry
  • Pulp
  • Paper Mills
  • Pulp Mills

Web Result

Large Fabricated Valves

Available in metal seat (Fig 76) and resilient seat (Fig 77). Fabricated carbon steel body flanges, packing gland and yoke. All STAINLESS STEEL construction available. Fabricated STAINLESS STEEL LINER. STAINLESS STEEL GATE for corrosion resistance and durability. FIG 77 with resilient seat is bi-directional with positive SHUT OFF in BOTH DIRECTIONS. Fig 77 available seat materials include Buna, EP...

http://www.a-cvalve.com/figlgfabvalve.htm

Custom Valves

Serving the world with CUSTOM FABRICATED KNIFE GATE VALVES A-C Valve can design and manufacture virtually any configuration of fabricated knife gate valve or slide gate valve that you might require. Our factory located in Woodland, Washington is staffed with some of the most knowledgeable people in the knife gate valve industry. A-C s engineering and manufacturing staff work hand in hand to insure...

http://www.a-cvalve.com/figcustvalve.htm

A-C L Series

Available in metal seat (Fig 76) and resilient seat (Fig 77). HEAVY DUTY cast ductile iron body, packing gland and yoke. Heavy duty Lug body design to resist deflection from line loads and internal pressure. ANSI B16.5-150 drilled & tapped lugs. Fabricated STAINLESS STEEL LINER. STAINLESS STEEL GATE for corrosion resistance and durability. Fig 76 with METAL TO METAL SEAT and unidirectional bev...

http://www.a-cvalve.com/Lseries.htm

Figure 176 Bonneted Knife Gate Valve

Bonneted Knife Gate Valves are ideally suited to aid in reduction of Fugitive Emissions. Cast stainless steel body, gland and yoke. Fabricated bonnet which can be designed to the full pressure rating of the valve. Wiper between body and bonnet to prevent solids from entering bonnet. Maintenance free Viton stem seal with packing- less O-ring seal gland design. Heavy duty designed body to resist def...

http://www.a-cvalve.com/fig176.htm

Figure 92 Slide Gate Valve

Fabricated stainless steel body ideally suited for dense or abrasive media, both wet and dry. Stainless steel gate, seat and raised faces. Heavy duty designed body to resist deflection from line loads and internal pressure. Gate designed to withstand full 150 PSI rated pressure as required by MSS SP-81. Body cavity, seat configuration and beveled gate designed to provide shut-off capability in thi...

http://www.a-cvalve.com/fig92.htm

Website Links: