Web Result

AltiSys Communications - Most Trusted Name in AltiGen Solutions

Tel: 408-752-0800sales@altisys.com |AltiSys Home|Industrial Servers|Phone Systems|Support|About Us Industrial Servers for your mission critical business applications... MAX1000 is now available for immediate delivery. 4500 hours of VM storage Meet-me Conference Call Recording Extension Anywhere and One number Access T1/PRI/E1/FXS support VoIP SIP support Value-Add Distributor since 1998 making our...

http://www.altisys.com/index.html

Is there a compatibility...

Q. Is there a compatibility issue between the Intel Pentium 4 SBC and the AltiGen Quantum board? Answer In recent years, many of the industrial computer manufacturers pay very little attention to the ISA bus support in designing their new generation of SBC. This often results in poor support for the legacy ISA interface boards such as AltiGens Quantum board. Our server products support up to 8 ISA...

http://www.altisys.com/html/faq-005.html

OFFICE3 server froze....

Q. OFFICE3 server froze. No POST, no beep, no display. What can I do? Answer Please check the CPU fan first. If it is defective, your server would freeze and become non-responding.If your server has a PCA-6186 SBC installed, it is possible that the server will no longer boot up even if you have replace the CPU fan. In such a case, there is no beep or display on the monitor when you power on the se...

http://www.altisys.com/html/faq-007.html

Cannot make a new IP705...

Q. Cannot make a new IP705 or IP710 phone to work with the MAX1000 server. Answer Currently, both the IP705 and the IP710 phones are shipped with the firmware which supports H.323 only. To use the IP phone with MAX1000, you need to update the firmware with the version shipped with the MAX1000 server. The new firmware supports the SIP protocol. [AltiSysHome] [IndustrialServers] [PhoneSystems] [Supp...

http://www.altisys.com/html/faq-008.html

How to recover a corrupted...

Q. How to recover a corrupted IDE RAID 1? Answer A corrupted IDE RAID 1 could occur when the server is not properly shut down. In such a case, you may experience some of the following symptoms. The disk array becomes non-bootable. The server performance becomes extremely sluggish. Windows logs a large number of controller error / time-out events. A corrupted IDE RAID 1 does not necessary mean corr...

http://www.altisys.com/html/faq-004.html

Website Links: