American Adhesive Coatings Co.
(978) 688-7400
12 Osgood St.
Lawrence, Massachusetts,
USA
01842
hot melt, film & pressure sensitive adhesives & coatings, coating & laminating equipment
- Year Established:
- 1987
Products & Services
-
- Hot Melt
- Adhesives
- Pressure Sensitive
- Film
- Heat Seal
-
- Coatings
- Coaters
- Laminators
- Product Assembly
Web Result
- WELCOME TO AMERICAN ADHESIVE COATINGS COMPANY
American Adhesive Coatings Company is the leader in pre-applied hot melt adhesives. Our technology affords greater quality, economy, safety, and versatility versus other adhesive systems. Here's why: KEYADVANTAGESOFHOT-MELTADHESIVES Read about our unique process in ON-LINETECHNICALSPECIFICATIONS Application Guidelines MSDS AACCLab Test Details &Forms Hot Melts - Hot Melt Adhesives - Pressure S...
- APPLICATION GUIDELINES
- LAMINATOR APPLICATIONOF ADHESIVES A-5600 & A-5750 GENERAL BOLTONEMERSONAMERICAS TL-1060 BLACKBROTHERS TB-60 EVANS-ROTORK MONCO Please Note: The information presented on this web site is only a guideline. Optimal settings will vary depending on many factors, including the maintenance history and condition of your equipment. Operators must evaluate these factors to determine optimal laminating c...
- PRODUCT USE INFORMATION
- Adhesives A-5600 & A-5750 MONCO Laminator Substrate Conditions: Board should be smooth, free from surface irregularities, sanded if necessary and then vacuumed to remove dust from the surface to be laminated. Board should not be laminated if temperature of surface is below 65 F. Preheating of boards is recommended for best results during cold weather. Surface Temperature of Nip Rollers: 300 - ...
- PRODUCT USE INFORMATION
- Adhesives A-5600 & A-5750 Evans-Rotork Laminator Substrate Conditions: Board should be smooth, free from surface irregularities, sanded if necessary and then vacuumed to remove dust from the surface to be laminated. Board should not be laminated if temperature of surface is below 65 F. Preheating of boards is recommended for best results during cold weather. Surface Temperature of Steel Roller...
- AS SEEN IN MODERN WOODWORKING
By Ted Krug, President and Jerry Villa, Vice President American Adhesive Coatings Company In the past five years the use of hot melt adhesives as a paper to board adhesive has increased due to a variety of advantages over non hot melt adhesives. The reasons for this increased usage as well as suggested standards for finished laminates are reviewed in the following article. Hot melt adhesives are d...
Website Links:
Own this business?
Request to update the information
Ads by MFGpages
