Manufacture full line of Stud Welding Fasteners, Screw Machined, CNC Milled, and CNC Turned products. With full secondary capabilites including threading, slotting, tapping, and punching.

Products & Services

• • Cnc
  • Screw Machined Parts
  • Welding Studs
  • Machined Parts
• • Cnc Milled Parts
  • Cnc Turned Parts
  • Precision Parts

Web Result

Arc Equipment

Arc Equipment ARC-500 | ARC-1200 | ARC-3000 | UA-1000 | UA-1800 ARC-500 Solid State, Single Phase Stud Welding Sytem SPECIFICATIONS Height 34" Width 14" Depth 14.5" Weight 150 lbs. Input Power Requirements: Voltage 208/230/460 VAC Fusing 100/100/50 Amps Single Phase 60 Hz Output: 900 Amps @ 40 VDC Stud Capacity: #10 thru 1/2" Duty Cycle: 1/2" 5/min. 3/8" 10/min. 5/16" 12/min. 1/4" 14/min. FEATURES...

http://www.champfast.com/products/arc/arc_equip.html

Special CD Studs

SPECIAL CAPACITOR DISCHARGE WELD STUDS From an .060" diameter no-thread CD stud to a 7/16" hex CD stud, we can furnish a special CD stud to meet your precision fastening requirements. The illustrations below indicate just a few of the possible configurations in which CD studs can be manufactured. These illustrations, however, do not represent any standard in-stock product line. If you require a sp...

http://www.champfast.com/products/cd_special.html

Champion Fasteners

STUD WELDING Stud welding is an arc welding process in which a fastener can be end-joined to a metal workpiece instantaneously. It is a complete fastening system, using a wide variety of fasteners with literally hundreds of uses -- each permanantly installed by one man, working on one side of the workpiece, in less than one second. HOW A FASTENER IS WELDED LOAD The fastener is manually or automati...

http://www.champfast.com/products/products.html

CD Equipment

CD Equipment CD-212 | CD-312 | CD-512 CD-212 Capacitor Discharge Stud Welder SPECIFICATIONS Dimensions: 8-1/2"H x 9"W x 11-3/4"D Weight: 26 lbs. Capacitance Charge: 66,000 mfd Range: 45-200 VDC Mode: Contact Stud Range: 14 ga. - 1/4" Weld Rate: 12 Studs/Min. Input Power: 110 VAC, 60 Hz, 20 AMPS PARTS LIST Description Parts No. Description Part No. System Complete 100-0112 Gun Only 300-0200 Power U...

http://www.champfast.com/products/cd_equip.html

FRB Welding Studs

FRB Welding StudsFRB (Full Reduced Base) welding studs are threaded fasteners with a weld base diameter 1/8" less than the major thread size (i.e. 3/8-16 has 1/4" dia. weld base). The weld fillet will always be the same nominal diameter as the thread. Holes in mating parts can be normal clearance size for a given thread. Caution: FRB studs will not develop full thread strength. For sizes smaller t...

http://www.champfast.com/products/arc/arc_frb.html

Website Links: