manufacturer of helical wire thread repair inserts, rock solid k-type inserts, e-z fix adehisve type inserts,

Products & Services

• • Inserts
  • Helical Insert
  • Wire Insert
  • Coil Insert
  • Helical Type
  • Screw
  • Fasteners
  • Threaded
  • Brass
  • Press In
  • Plastic
  • Wood
  • Steel
• • Repair
  • Stainless Steel
  • Inconel
  • Phosphor Bronze
  • Solid Insert
  • Keensert Type
  • E-z Lok Type
  • Thread Repair
  • Giant Size
  • Keylock
  • Leylocking
  • Metric

Web Result

Chrislynn Inserts' Web Site

E-Z Fix Specifications A solid insert that is threaded on the inside and threaded on the outside with a slot across its' top to be used to screw the insert in. A strip of dry adhesive is coated on the outside thread, when the insert is screwed in it activates the adhesive which will set solid in 2-3 minutes. M aterials available: A: 12L14 Carbon Steel B: 303 Stainless Steel D iameters available: A...

http://www.chrislynninserts.com/ezfixpages/specs.htm

Chrislynn Inserts' Web Site

EZ-Fix KNIFE THREAD INSERTS FOR WOOD External knife threads provide superior holding power in hard and soft woods, particle board and all wood products. Use wherever field assembly or disassembly could lead to thread erosion or stripping. The long pilot assures straight driving into a drilled hole. Install with a screw driver, bolt and nut, tapping head, or E-Z Fix driving tool. PHONE: 1-800-926-1...

http://www.chrislynninserts.com/woodplasticpages/knife.htm

Chrislynn Inserts' Web Site

Rock Solid Insert Specifications A solid insert that is threaded on the inside and threaded on the outside with wedges (keys) attached to the top of the insert. After the insert is screwed into the part the wedges (keys) are driven down into the tapped threads to keep the insert from turning in either direction. M aterials available: A: Carbons Steel - C1215 or equivalent B: Stainless Steel - 303 ...

http://www.chrislynninserts.com/rocksolidpages/specs.htm

Chrislynn Inserts' Web Site

E - Z FIX SPECIFICATIONS (For Plastics and Wood) P lastic Applications: A solid insert that has an internal thread with a diamond knurled surface on the outside. The body is slotted so it may expand when the fastener is screwed into the insert. The inserts are installed by pressing them into a drilled or cored hole. M aterials available: 1) Brass (standard material) 2) 303 Stainless Steel 3) Alumi...

http://www.chrislynninserts.com/woodplasticpages/specs.htm

Chrislynn Inserts' Web Site

EZ-Fix PRESS INSERTS FOR PLASTICS For Corded or Drilled Holes in Plastics This diamond knurled insert was designed to replace molded-in inserts and threads in plastic castings. Installed "cold", press inserts sharply reduce the cost of moldings. The number of "shots" per hour is multiplied, reject waste caused by misaligned and faulty inserts is cut and no retapping to clean threads is necessary. ...

http://www.chrislynninserts.com/woodplasticpages/press.htm

Website Links: