Products & Services

• • Agc
  • Alloy Compensation
  • Automatic Gauging
  • Automatic Gauge Control
  • Control
  • Centerline Gauge
  • Cold Mills
  • Crown
  • Density Gauge
  • Density Gauging
  • Detector
  • Deviation
  • Edge Drop
  • Feather
  • Gauger
  • Gauging
  • Gager
  • Cigi
  • Hot Mills
  • Hot Mill Gage
  • Non-contact Gauge
  • Non-contacting
  • Non-contact Strip Thickness Gauge
  • Non-contact Strip Thickness Gauging Systems
  • Non-contact Strip Thickness Measuring Systems
  • Non-contact Strip Measurement
  • Non-contact Strip Thickness X-ray Gauge
  • Non-contact Thickness Gauge
  • Non-contact X-ray Gauge
  • Pickling Lines
• • Process Lines
  • Profile Gage
  • Profile Gauge
  • Profile Systems
  • Radiometric
  • Reversing Mill
  • Scanning Gauge
  • Scanning Systems
  • Single-pass
  • Single Pass
  • Multi-pass
  • Mulit Pass
  • Spc Data Logging
  • Spc Data Logging Systems
  • Spc Reports
  • Strip Thickness Gauge
  • Strip Thickness
  • Strip Thickness Measurement
  • Thickness Gauging
  • Thickness Measurement
  • Thickness Measuring
  • Thickness Gauge
  • Traversing Gauge
  • X-ray
  • X-ray Gauge
  • X-ray Strip Thickness Gauge
  • X-ray Thickness Gauge
  • X-ray Non-contact Strip Thickness Measuring Systems
  • Thickness Gauginge

Web Result

Deviation Sensitivity...

Connecticut Industrial Gauging, Inc. GAUGE OVERVIEW Home | Gauge Overview | Products | Support | Contact Us Deviation Sensitivity Calibration Screen The deviation sensitivity must change with nominal thickness settings because the ratio between fixed x-ray absorbers (generator windows, detector windows, air gap, etc.) and product x-ray absorption changes continually with thickness. Similar to the ...

http://www.xraygauge.com/Overview/DevSenCalScrn.htm

Connecticut Industrial Gauging

Connecticut Industrial Gauging, Inc. PRODUCTS Home | Gauge Overview | Products | Support | Contact Us System Specifications Accuracy: At zero deviation, the accuracy will be within 0.1% of nominal thickness, or 0.00002" ( 0.5 m), whichever is greater Statistical Noise: 0.1% of nominal thickness, 90% of the time Time Constant: 20 milliseconds or less Deviation Range: 30% (maximum) Deviation Di...

http://www.xraygauge.com/Products/Products.htm

Connecticut Industrial Gauging

Connecticut Industrial Gauging, Inc. GAUGE OVERVIEW Home | Gauge Overview | Products | Support | Contact Us Components of the Gauge Electronic Equipment Cabinet X-Ray Generation System Standards Magazine X-Ray Detector C-Frame Line Voltage Isolation & Conditioning Transformer Siemens S7-400 Power PLC Control Center Generator Reference Calibration Screen Deviation Sensitivity Calibration Screen...

http://www.xraygauge.com/Overview/Components.htm

Analog Outputs

Connecticut Industrial Gauging, Inc. GAUGE OVERVIEW Home | Gauge Overview | Products | Support | Contact Us Analog Outputs The two "standard" deviation outputs are: 10V = 0.010" 10V = 10% These voltages may also be custom scaled to fit AGC applications. For example, 10V = 0.020" or whatever useful resolution is required. Back ...

http://www.xraygauge.com/Overview/AnalogOut.htm

Generator Reference Calibration...

Connecticut Industrial Gauging, Inc. GAUGE OVERVIEW Home | Gauge Overview | Products | Support | Contact Us Generator Reference Calibration Screen In order to maintain a constant statistical noise level, we must increase the penetrating capability of the x-rays with an increase in the nominal thickness setting. If we did not increase the x-ray kV with a continuing increase in thickness, there woul...

http://www.xraygauge.com/Overview/GenRefCalScrn.htm

Website Links: