Czech-Mate Enterprises, LLC
(636) 939-1053
2522 Millrace Dr.
St. Peters, Missouri,
USA
63376
at czech-mate enterprises, we recognize that there are benefits to using technology in all types of racing - with or without big-money sponsorship. we've developed our tach-matetm line of data acquisition systems to be available for all racers, regardless of racing venue or budget.
- Year Established:
- 1993
Products & Services
-
- Data Acquisition
- Data Logger
- Data Logging
- Data Recording
- Recall Tach
- Memory Tach
- Motorsports
- Engine Analysis
- Racing
- Magnetos
- Karts
-
- Go-karts
- Tractor Pulls
- High Preformance
- Replay
- Tale-tell Tach
- Tell-tale Tach
- Traction Control
- Lap Timing
- Race Computer
- On-board Computer
Web Result
- Czech-Mate: Users Guide
- General Tach-MateTM Usage Instructions: Start the engine. Apply power to your tachometer and Tach-MateTM control box. Click and release the RESET switch to begin recording. In models with non-volatile memory (blue and white wires visible under the lid of the control box and model numbers beginning with 32 or 2H), this will cause the tach to jump to about 7000 RPM and fall back to zero. This is a s...
- Tach-Mate
- Welcome to the world of DATA ACQUISITION !! TACH-MATETM is a small device that attaches easily to most existing analog tachometers to add complete memory. It is far more than just HIGH RPM ... any over-priced tell-tale tach can do that! TACH-MATETM records all the RPMs passed to your tach - just as you would see them, if you could watch the tach instead of the track - at a rate of 30 times per sec...
- Czech-Mate: Comments
- Thank you for visiting our web site. If you would like us to contact you for any reason, please fill in the appropriate information below. We would also welcome your comments about our web site and products. This can be anonymous if you wish, but we would appreciate any demographics information, especially your type of racing and geographic location. First: Last: Company: Address 1: Address 2: Cit...
- Czech-Mate: Install Info
- General Tach-MateTM Installation steps: Select mounting location(s) for Control box and switch panel or remote switches. Attach switch panel or remote switches, within reach of the driver. Secure the Tach-MateTM control box within reach of wiring and switches. Connect wiring harness as follows: RED 12 volt power (will run on 9.6 - 18 volts, 12 volts recommended) BLACK GROUND For best results, grou...
- Trac-Mate
- TRAC-MATETM is REAL Traction Control ... the Driver retains ultimate control at all times, and there is no audible engine misfire to give away the secret of this competitive advantage. Proven performance in the dirt and on asphalt. AVAILABLE TRAC-MATETM SYSTEMS: TRAC-MATETM Lite - Sensorless $895.00 TRAC-MATETM - Standard Timing (2 Sensors) $ 1,095.00 TRAC-MATETM - Standard Misfire (2 Sensors) $ 1...
Website Links:
Own this business?
Request to update the information