epc - engineered polymers corporation located in mora, minnesota. where technology and experience provide solutions. structural foam molding, specializing in large and complex molded parts. epc is iso 9001:2000 certified.

Products & Services

• • Engineered Polymers Corporation
  • Epc
  • Structural Foam Molding Specializing In Large & Complex Molded Parts
  • Injection Molding
  • Plastics
  • Gas Assisted Molding
• • Straight Injection Molding
  • Multi-nozzle Structural Foam
  • Multi-nozzle Structural Web
  • Single Nozzle Structural Foam
  • Gas Counter Pressure

Web Result

Gas Counter Pressure Molding

Gas Counter Pressure Home | Processes | Value Added Processes | Design & Engineering Quality Services | Facility | Our Mission | About Us | Contact Us | News Gas Counter Pressure Molding is a supplemental process to single-nozzle structural foam molding for enhanced part surface finish. Gas counter pressure requires the tool to be charged under pressure. When the material enters a pressurized ...

http://www.epcmolding.com/gascounter.htm

Multi-Nozzle Structural...

Multi-Nozzle Web Home | Processes | Value Added Processes | Design & Engineering Quality Services | Facility | Our Mission | About Us | Contact Us | News Multi-Nozzle Structrual Web Molding is similar to multi-nozzle structural foam except nitrogen is not introduced during the melting process. Instead, melted plastic is shot into the mold and gas is subsequently injected to pack out the part. ...

http://www.epcmolding.com/multiweb.htm

Single-Nozzle Structural...

Single-Nozzle Foam Home | Processes | Value Added Processes | Design & Engineering Quality Services | Facility | Our Mission | About Us | Contact Us | News Single-Nozzle Structural Foam Molding, also known as Injection Foam, is similar to multi-nozzle structural foam. Single-nozzle structural foam molding uses chemical blowing agent instead of nitrogen gas. This process can be used where prope...

http://www.epcmolding.com/singlenozz.htm

Multi-Nozzle Structural...

Multi-Nozzle Foam Home | Processes | Value Added Processes | Design & Engineering Quality Services | Facility | Our Mission | About Us | Contact Us | News Multi-Nozzle Structrual Foam Molding is an injection molding process that mixes nitrogen with the resin under pressure during the melting process. The material is then injected into the mold under low pressure. The gas is allowed to expand t...

http://www.epcmolding.com/multifoam.htm

Straight Injection Molding

Straight Injection Home | Processes | Value Added Processes | Design & Engineering Quality Services | Facility | Our Mission | About Us | Contact Us | News Straight Injection Molding is the molding process which most people are familiar with. It uses standard plastic part design requirements, such as uniform wall sections. EPC has built its market franchise on its ability to out-engineer and o...

http://www.epcmolding.com/straightinj.htm

Website Links: