distributor of f.p. reamers as well as micro-drills, international sales only

Products & Services

• • Reamer
  • Reamers
  • Micro-drills
  • Micro-drill
  • Fpreamer
  • Fp Reamer
  • Fp Trading
  • Reamre
  • Fp Trading Co
  • Carbide Reamer
  • Fp Tool
  • Fp Tools
  • Fptools Co
  • Fp Tools Co
  • Japan Reamer
  • Japanese Reamer
• • Carbide
  • Hi-speed Steel
  • Fp
  • Fine Precision
  • Carbide Reamers
  • Cutting Tools
  • Adjustable Reamer
  • Morse Taper Reamer
  • F.p.reamer.com
  • Hss Reamer
  • Reaming
  • Drilling
  • Removing Burr
  • Remove Burr
  • Hole Making
  • Raemer

Web Result

F.P. Carbide Reamer C Series

Features Price lower than G series with the same effectiveness. Suitable for deep holes Cutting Conditions For high-carbide alloy steel (SKD,SUS and structural carbon steel), set cutting speed to 10-20m/min. For Titanium alloy, set cutting speed to 5-10 m/min. Removal amount: Dia. 0.05 - Dia. 0.3 mm. Please supply adequate volume of cutting oil. Specification Table:Tolerance Diameter = 0 / +0.005m...

http://www.fpreamer.com/productsguide/cc/cc-e.html

F.P. HSS High Helical Reamer

Straight Shank Type Morse Taper Shank Type Features Right handed spiral moves cutting chips forward, and allows hi-speed reaming. 0/+0.005 blade tolerance as our standard, suitable for high precision holes. Cutting Conditions 1: Refer to the table below before determining the cutting speed r.p.m.. 2: Keep the removal amount to 0.1 dia. - 0.2mm dia. or less for difficult-to-cut materials and 0.2 di...

http://www.fpreamer.com/productsguide/hh/hh-e.html

F.P. Carbide Reamer SH Series

Features For Blind Holes as well as Thru Holes Special Coating designed for material HRC 20 - 40 End Mill Shank Cutting Conditions Cutting Speed Work Piece MILD STEEL(SS) CARBON STEEL(S55C) ALLOY STEEL(SCM/SUJ) TOOL STEEL(SKH/SKD) STAINLESS STEEL(SUS) (m/min) 10 - 35 10 - 35 8 - 35 5 - 35 2 - 25 Work Piece CAST IRON(FC/FCD) ALUMINUM(A/ADC) COPPER ALLOY(C) HRC40 HRC50 (m/min) 8 - 35 15 - 40 10 - 40...

http://www.fpreamer.com/productsguide/sh/sh-e.html

F.P. Carbide Reamer B Series

Features For burnishing: No back-taper, better surface roughness.Edged blades ream without following predrilled hole, which means it can correct tilted predrilled hole. Cutting Conditions For light alloy, set cutting speed to 20-40m/min. For cast iron, set cutting speed to 15-20m/min. Feed best at 0.05mm/rev or less. Please use adequate volume of cutting oil. Specification Table: Diameter D (mm) F...

http://www.fpreamer.com/productsguide/cb/cb-e.html

F.P. Carbide Reamer G Series

Features For general work pieces 5 - 10 times more durable than conventional high-speed-steel(HSS) reamers. The accuracy of finished holes can be maintained over prolonged use. Saves time with faster cutting speed and feed than HSS reamers. The most popular carbide reamer in Japan with No.1 in share. Cutting Conditions For high-carbide alloy steel (SKD,SUS and structural carbon steel), set cutting...

http://www.fpreamer.com/productsguide/cg/cg-e.html

Website Links: