galvanic applied sciences - h2s total sulfur analyzers, sulfur chromatographs, on-line gas chromatographs, infrared co2, moisture analyzers, volume correctors and pressure recorders for the gas measurement industry.

Products & Services

• • Galvanic
  • Galvanic Applied Sciences
  • Gas
  • Liquids
• • Measurement
  • Equipment
  • H2s

Web Result

evaporator condensate...

EVAPORATOR CONDENSATE COLOR MONITORING APPLICATION NOTE 4.002.A0 PULP AND PAPER INTRODUCTION The detection of color changes in a liquid process stream is often a good indication of other process parameters that might effect the intermediate and/or final product. In the case of pulp mills, there is a definite advantage in monitoring the color of the condensate off the evaporator. The condensate is ...

http://www.galvanic.com/condensate-color-monitoring.htm

H2S Analyzer, Gas Chromatograph, Gas and Liquids Measurement

Galvanic Applied Sciences Inc. designs, manufactures and markets a full line of analysis and measurement equipment for the natural gas and process industries. The product range includes H2S Analyzers the 902 H2S Analyzer and the 903 H2S Analyzer, Gas Chromatograph, Tail Gas Analyzers, Acid Gas Analyzers, Continuous Emission Monitoring (CEM), Total Sulfur Analyzers, Sulfur Gas Chromatographs, Moist...

http://www.galvanic.com/

jet fuel contamination

JET FUEL CONTAMINATION APPLICATION NOTE 2.001.A0 INTRODUCTION Kerosene is the most commonly used material for the production of jet fuel. Fuel systems demand that jet fuel be delivered free of water and dirt. Jet fuels tend to retain fine particulate matter and water much longer than aviation gasoline due to the corrosion inhibitors and anti-static additives, which contain surfactants. Therefore, ...

http://www.galvanic.com/monitor-jet-fuel-contamination.htm

oil in condensate

OIL IN CONDENSATE The red dots show measurement locations for colour, oil, or TOC in condensate. INTRODUCTION Condensate is typically clean water. Condensate return is used as boiler feedwater whenever possible, since it is clean and hot. It takes significantly less energy to reboil condensate return than to use fresh make-up water. Condensate goes through turbines, pumps, heat exchangers and othe...

http://www.galvanic.com/measure-oil-in-condensate.htm

oil and suspended solids...

OIL AND SUSPENDED SOLIDS IN CONDENSATE RETURN INDUSTRY-POWER UTILITIES INTRODUCTION The purity of condensate return and boiler feedwater has always been a concern for operations and maintenance at power utilities. The presence of contaminants (oil or suspended solids, especially iron) in condensate return can greatly increase maintenance costs and significantly decrease boiler efficiency. APPLICAT...

http://www.galvanic.com/monitor-oil-suspended-solids.htm

Website Links: