garland manufacturing company manufactures gar-dur uhmw plastic profiles, uhmw polyethylene, custom machined parts, and a product line of mallets and soft faced hammers made from the finest water buffalo rawhide.

Products & Services

• • Uhmw
  • Uhmw Pe
  • Gar-dur
  • Ultra-high Molecular Weight
  • Astm D-4020
  • Low-friction
  • High-impac
  • Soft Face Hammers
  • Mallets
  • Water Buffalo Rawhide
  • Plastic Profiles
  • Uhmw Polyethylene
  • Garland Manufacturing
  • Plastic Machined Parts
  • Garland
  • Uhmwpe
  • Ultra High Molecular Weight Polyethylene
  • Polyethylene
  • Plastic Rod
  • Plastic Sheet
• • Plastic Tube
  • Plastic Bar
  • Plastic Profile
  • Abrasion Resistant
  • Fabricated Plastic Parts
  • Parts Machined
  • Machined Plastic Parts
  • Polymers
  • Polyethylene
  • Mallets
  • Hammers
  • Water Buffalo
  • Rawhide Mallet
  • Rawhide Hammer
  • Rubber Mallet
  • Rubber Hammer
  • Dead Blow Hammer
  • Steel Rule Die
  • Steelrule Dies

Web Result

Wastewater UHMW Sprockets, Wear Shoes and Wear Strips Garland Manufacturing

Gar-Dur UHMW applications for Wastewater Treatment Plant equipment. Primary and Secondary Sedimentation tanks, chain and flight systems. Garland Manufacturing offers a complete line of non-metallic, abrasion resistant material and parts for wastewater treatment plant equipment, including sedimentation and clarifier tanks. In primary and secondary WWTP processing applications, UHMW is the best choi...

http://www.garlandmfg.com/plastics/wastewater.html

UHMW Heat Forming Garland Manufacturing

Many applications require Gar-Dur UHMW plastic rod, bar or sheet to conform to a specified contour surface or to bend around corners. Shaping thin (<1/8" thick) sheet over large (<10") diameter contours can be accomplished simply by forcing the sheet against the surface and mechanically fastening them together. To form more difficult contours, heavier cross sections, or sharp edges, however,...

http://www.garlandmfg.com/plastics/heatformingparts.html

UHMW Garland Manufacturing

Identification of UHMW Burn Test - light with a match - smell smoke - smells like candle wax - indicates polyethylene - Gar-Dur does not drip as readily as HDPE but it will drip Oven Test - place on aluminum dish in a 300 oven - regular HDPE will slump or melt - Gar-Dur will not change size or shape (it could warp or distort due to built in stresses) Saw Test - regular HDPE gives sawdust or filing...

http://www.garlandmfg.com/plastics/faq.html

UHMW UHMWPE Garland Manufacturing

Garland Manufacturing Company manufactures Gar-Dur UHMW plastic profiles, custom machined parts, and a product line of mallets and soft faced hammers. The plastic profiles and custom machined products are made from UHMWPE (ultra high molecular weight polyethylene) materials. GAR-DUR UHMW plastic products are highly abrasion resistant with an extremely low coefficient of friction and high impact st...

http://www.garlandmfg.com/plastics/plastics.html

UHMW Machining Fabrication Garland Manufacturing

Warner Swasey Large Machine Lathe 6" Spindle Hole - at 314 rpm - feed at slow setting #1 = 3" feed in 30 seconds - rougher finish at setting #4 = 3" feed in 16 seconds Leblond Machine Lathe 1-1/2" Spindle Hole - at 364 rpm - slower the feed = smoother the finish Turret Lathe - 2-3/4" diameter spindle hole - at 364 rpm - slow feed approximately 12 minutes per 10 foot length Tools - an 8 clearance o...

http://www.garlandmfg.com/plastics/capabilities.html

Website Links: