hyden - deals into lamination machine, coating machines, slitting machine and pouch making machine. find leading manufacturer of pouch making machine, lamination machine, coating machines and slitting machine from www.hydenplastics.com.

Products & Services

• • Lamination Machine
  • Coating Machines
• • Slitting Machine
  • Pouch Making Machine.

Web Result

Lamination Machine, Coating Machines, Slitting Machine, Pouch Making Machine.

Lamination Machine, Coating Machines, Slitting Machine, Pouch Making Machine: We have a standard range of machines that have been designed to suit a wide variety of products like Slitting Machine, PVC Slitting Machine, Laminate Slitting Machine, Three Side Seal Pouch Machine, Pouch Making Machine, Center Seal Pouch Machine, PVC Seaming Machine, Shrink PVC Gluing Machine, Shrink PVC Label Making Ma...

http://www.hydenplastics.com/

Hot Melt Coater

HOT MELT COATING MACHINE : ROLL TO ROLL The use of hot melt as a bonding adhesive in the industry has been transformed over the past few years and is gradually replacing conventional solvent or water-based systems and flame lamination. HYDEN is one of the leading designers and builder of a wide range of HOT MELT COATING machines with all the options mentioned below. We offer coating machines which...

http://www.hydenplastics.com/hot_melt_coating_machine.htm

Slot Die / T die

Slot Die (Extrusion) Coating: : In the Slot Die process, the coating is squeezed out by gravity or under pressure through a slot and onto the substrate. If the coating is 100% solids, the process is termed 'Extrusion' and in this case, the line speed is frequently much faster than the speed of the extrusion. This enables coatings to be considerably thinner than the width of the slot. Die coating M...

http://www.hydenplastics.com/slot_die.htm

Pouch Making Machine, Center Seal Pouch.

Infra red drying Drying of water and water-based lacquers requires a lot of heat energy to remove water. Hence, the line speeds of water based coatings were few meters per min. HYDEN developed this new technique in 1999; It uses Infra red energy created by LPG & by directly drying the coating. It saves lot of energy & gives four times more line speeds. Know, this process of drying is used ...

http://www.hydenplastics.com/infrared_driers.htm

Reverse Roll

Reverse Roll Coating: In this type of coating procedure, the coating material is measured onto the applicator roller by precision setting of the gap between the upper metering roller and the application roller. The coating is 'wiped' off the application roller by the substrate as it passes around the support roller at the bottom. The diagram illustrates a 3-roll reverse roll coating process. HYDEN...

http://www.hydenplastics.com/reverse_roll_coating.htm

Website Links: