micro tech engineering-burnishing tools, roller burnishing tools, burnishing machines, burnishing tool, india

Products & Services

• • Roller Burnishing Tools
  • Burnishing Tools
• • Burnishing Machines

Web Result

Roller Burnishing Tools, Burnishing Tools - Micro Tech Engineering

We are one of the Reputed Manufacturers of Roller Burnishing Tools since 1992 in Coimbatore, India and approved by leading industries. We do all type Burnishing Tools like ID internal-bore, OD external-shaft, taper ID&OD,radious ,h-type ,Single Roll ,Carbide Burnishing Tools, Diamond Burnishing Tools, Special Purpose & Burnishing machines. With help of our Burnishing Tool mirror kind of su...

http://www.burnishingtool.net/

Roller Burnishing Tools

Roller Burnishing Tools Roller Burnishing Toolis a non-cutting machine process with aim of producing mirror-like surface finishes with low roughness Ra-0.05um to Ra-0.35um, consistantly accurate size and increased hardness of the skin layer through cold working operation. It removes no metal, but rather compresses or "irons out" the peaks of a metal's surface into the valleys. Turned surface Rolle...

http://www.burnishingtool.net/rollerburnishing.html

Roller Burnishing Tool

For most of the metals low viscosity lubricating oil is recommended. Aluminium-highly refined paraffin base oil like Diesel of Kerosine is recommmended. After burnishing operation, the tools should be cleansed by diesel or kerosine and put some lubricating oil on the rollers and taper mandrel and keep it safely. ...

http://www.burnishingtool.net/maintenance.html

Burnishing Tool

The Roller Burnishing Toolconsists of a series of hardened and highly polished precision tapered rolls positioned in slots within a retaining cage on the tapered stem. The Tool is sized so that the rolls develop steady rolling pressure against the work surface, a pressure that exceeds the yeild point as the rolls rotate, they cause the peaks of metal to 'Flow' into the valleys. This plastic deform...

http://www.burnishingtool.net/working_principle.html

Roller Burnishing Tool

Before mounting Micro Tech Roller Burnishing Tool in your machine, loosen the set screw in the adjustment nut [O type tools] or pull upward direction of the top spring loaded clutch [C type tools]. Move the tool back and forth in the bore or OD of the prepared work-piece, meanwhile screwing the cage sleeve assembly into the adjustment nut untill there is a slight drag on the rolls. Screw the cage-...

http://www.burnishingtool.net/tool_settings.html

Website Links: