manufacturer of centrifugal pumps, end suction pumps, cooling tower pumps, chillers, and various circulating and transfer applications. memphis pump - manufacturing pyramid pumps since 1949

Products & Services

• • Centrifugal Pump
  • End Suction Pumps
  • Memphis Pump
  • Cooling Tower Pumps
  • Cast Iron Pumps
  • Chill Water Pumps
  • Ag Chemical Sprayer Pumps
• • Condenser Water Pumps
  • Bronze Pumps
  • Booster Pumps
  • Back Pullout Pumps
  • Circulating Pumps
  • Transfer Pumps
  • Memphis Pump

Web Result

Agricultural Sprayer Pumps

EC-55 1 " SUCTION 1" DISCHARGE ELECTRO-MAGNETIC CLUTCH DRIVEN SPRAY PUMP THE FRONT-MOUNTED PUMP THAT IS FAN-BELT DRIVEN-MAGNETIC CLUTCH OPERATED-TO FREE YOUR PTO AND HYDRAULIC SYSTEM, USING MEMPHIS PUMPS' PROVEN CENTRIFUGAL PUMP. AVAILABLE IN RIGHT OR LEFT HAND ROTATION. ALSO AVAILABLE LESS CLUTCH FOR COUPLING OR PULLEY DRIVE. Performance at 4000 RPM PSI Gallon Per Minute 85 0 80 23 75 33 70 48 6...

http://www.memphispump.com/ag.html

Group MPO

Size 1x1-1/4x5 NPT Open Impeller 3450 RPM Size 1-1/2X2-5 Open Impeller 3450 RPM Memphis' Open Impeller Centrifugal Pumps are excellent for general duty uses, within the parameters of head and volume for the different models, but they are especially suitable for pumping granular solutions. The open impellers will pass spheres up to 5/16", which enables these pumps to pump slurries, wettable powers ...

http://www.memphispump.com/mpo.html

Untitled

Group MPH and MPA 3450 RPM Close Coupled General Duty Centrifugals Flow Rates to 600 GPM Heads to 280 Ft TDH Group TMP and MPAL 1725 RPM Close Coupled High Volume Circulator Flow Rates to 800 GPM Heads to 130 Ft TDH Group MFP 3450 RPM Close Coupled Pressure Booster Pump Flow Rates to 60 GPM Heads to 146 Ft TDH Group MPO 3450 RPM Close Coupled Open Impeller Pumps Suitable for Granular Solutions Wit...

http://www.memphispump.com/main.html

Group MPH and MPA

Model MPA pumps are suitable for Capacities up to 600 GPM, and heads to 280 Feet. Motors range from 5 to 25 HP. SPECIFICATIONS VOLUTE Close grained cast iron construction with large suction and discharge ports to prevent cavitation. Volutes have pipe plugs for draining and venting the pump, and can be rotated 90 increments to conform to piping layouts. IMPELLER Enclosed, one piece cast vibration ...

http://www.memphispump.com/mph.html

Group MFP

These pumps give high heads at low volume and are recommended for boosting water pressure for washdown lines and similar applications. Adds up to 60 PSI to existing pressure. Memphis' pumps are designed and built to standards developed over many years of reliable, efficient service. Motors are American made NEMA type. Volutes are cast from close grain grey iron with large intake and discharge open...

http://www.memphispump.com/mfp.html

Website Links: