Products & Services

• • Conveyors And Conveying Equipment

Web Result

powered by

Microsoft | Translator Privacy | Legal Powered by Translator Help Microsoft is not responsible for the content below ...

http://www.microsofttranslator.com/bv.aspx?from=&to=en&a=merrick-inc.com/

Industrial Networking

Industrial Network Solutions for Merrick Weighing Controllers An increasing number of Merrick installations use industrial networks rather than relay contacts and analog signals. We see better performance, better accuracy and drastically better reliability. This is due to better on-line drill-down capabilities into feeder data, as well as the wide-spread use of trend recording. Other benefits incl...

http://www2.merrick-inc.com/mct/

CLX via ABC-EIP

EtherNet/IP communication via ABC-EIP to ControlLogix PLC's. This page is under revision. Contact Merrick Tecnical support! It is possible to exchange status and variables between most MC and all Genetix GCM controllers and EtherNet/IP capable PLCs, using an AnyBus Communicator Gateway for Ethernet module (ABC-EIP) from HMS Systems. It replaces both analog and digital I/O. Full Floating Point acc...

http://www2.merrick-inc.com/mct/CLX_HMI/MC3HMSCLX.htm

DH+ to PLC5

Data Highway Plus communication via DL2000 KFX to PLC-5. This solution is no longer fully supported. Contact Merrick Technical support! It is possible to exchange status and variables between MC and Genetix GCM controllers and Data Highway Plus (DH+) equipped PLC's, using a DL2000 KFX interface (KFX) from DataLink Technologies Group, Inc. It replaces both analog and digital I/O. Full Floating Poi...

http://www2.merrick-inc.com/mct/PLC5_DL2000/MC3DL2000PLC5.htm

DF-1 to ControlLogix Channel 0

EtherNet/IP communication via ENI to ControlLogix PLC's. It is possible to exchange status and variables between one Genetix GCM or MC controllers and a ControlLogix PLC using the standard serial port (Channel 0) on the PLC.. It replaces both analog and digital I/O. Full Floating Point accuracy is maintained for variables. Up to 10 variables and 80 I/O points can be configured. See Genetix GCM Co...

http://www2.merrick-inc.com/mct/CLX_Ch0/MC3Ch0CLX.htm

Website Links: