MicroSpec Corp.
(603) 532-4800
327 Jaffrey Rd.
Peterborough, New Hampshire,
USA
03458
http://www.microspecorporation.com
- Year Established:
- 1989
Products & Services
-
- Plastic Products
Web Result
- Nylon 6,6
- viscosityThe resistance to flow of a fluid, defined as the ratio of shear stress to shear rate. The viscosity of a polymer decreases as the shear rate increases. Nylon 6,6 has a high molecular weight and therefore high viscosity. It has good abrasion resistance when compared to nylon 6 and better resistant to both high and low temperatures. Compared to nylon 12, it is more brittle at low temperatu...
- Manufacturing Microspec Corporation Advanced Medical Extrusions
- extruderEquipment for melting, pressurizing and homogenizing plastics by means of a rotating screw. Different configurations are possible; the most simple one is a single screw extruder mainly used for conversion processes like profile extrusion. Companies around the world depend on Microspec to extrude custom bump tubing, co-extrusions, micro-extrusions, multi-lumen tubing, profile extrusions and...
- Technical Support Microspec Corporation Advanced Medical Extrusions
- Microspec works as an extension of your medical device product development team, specializing exclusively in advanced medical extrusions. Our dedicated staff may already be experimenting with materials, processes and tools that can translate your vision into an extrudable product. Medical tubing extruded by Microspec functions, for example, as the delivery and withdrawal system for fluids, air, ne...
- Besno
- Besno is part of the nylon 11 family (polymers with 11 carbon atoms). It has good stress crack resistance, very low water absorption and good dimensional stability. It is semi-flexible. Besno offers excellent mechnical properties over a wide temperature range. It has greater stability at high temperatures than Aesno. Specific gravity 0.0368 lb./in.3 (1.02 g/cc) 0.0376 lb./in.3 (1.04 g/cc) Melting ...
- Vestamid
- VESTAMID, part of the nylon 12 family, combines elasticity, hardness, toughness, and low processing tolerances in the extrusion process. Because of its high bursting pressure and low sliding friction, VESTAMID is used, for example, to make dilation catheters. Specific gravity 0.0365 lb./in.3 (1.01 g/cc) 0.0365 lb./in.3 (1.01 g/cc) Melting point 352F (178C) 352F (178C) Glass transition temperature ...
Website Links:
MicroSpec Corp. | Aesno | Besno | Bump Tubing | Calendar Of Events | Carbothane | Coated Wire | Co-extrusions | Engineering Resins | Estane | In The Community | Internship Opportunities | Micro-extrusions | Multi-lumen Tubing | Nylon 12 | Nylon 6 | Nylon 6,6 | Nylons | Other Materials | Our Customer Focus
Own this business?
Request to update the information