Products & Services

• • Workholding
  • Clamps
  • Clamping Components
  • Jigs
  • Fixtures
  • Vise Pallet
• • Fixture Clamp
  • T-slot Clamp
  • Strap Clamp
  • Collet Wrench
  • Collet Stop
  • Clamp Kit

Web Result

Mitee-Bite Products Introduces...

VACMAGIC Mitee-Bite Products introduces the Vacmagic, a versatile vacuum pallet changing system that runs off 70-80 psi of standard shop air, no vacuum pump required. The customer can run high volume production runs at the same feeds and speeds they normally would, with the repeatability of .0002. Swap over to a vacuum pallet for those jobs too difficult to clamp and be up and running within secon...

http://www.miteebite.com/pr/pr_vacmagic.html

Speed Block Expands Uses...

Speed Block The manually operated Speed Block is a simple and effective way to use the ID Xpansion clamps when the tapered screw cannot be accessed with the hex key. The precision block has heat treated and ground pistons that are cam actuated to tighten and loosen the clamps. The steel drive plates, which move up and down with the pistons, are intended to be drilled and tapped for the tapered scr...

http://www.miteebite.com/pr/pr_speedblock.html

Mitee-Bite Products Co. - OK-VISE Clamps

OK-VISE CLAMPS THREE-DIMENSIONAL MACHINING Due to a low-profile design of OK-VISE Clamps, it is possible to execute flexible three-directional machining of workpieces with one fastening. This ability to machine a workpiece in three planes means improved accuracy. PULL DOWN ACTION The single wedge clamps keep the workpieces steadily in place, not allowing upward or downward movement. The double-w...

http://www.miteebite.com/products/ok_vise_e.html

OK Vise Helps Keep Smith...

Smith & Wesson located in Springfield, MA is well known the world over, for it's high quality gun manufacturing. It's facility is over 500,000 square feet and they employee in excess of 600 people. Perhaps less known is the Specialty Services division of Smith & Wesson, which does various types of contract machining. Recently the Specialty Services Division was running jobs for Weatherby R...

http://www.miteebite.com/pr/pr_smithwesson.html

PRESSRELEASES

http://www.miteebite.com/pr/pr_pull_lock.html January-2009 - Mitee-Bite Products Inc. and TE-CO Announce Partnership June-2007 - Mitee-Bite Introduces the New ID Xpansion Clamp for VMC and HMC Applications March-2007 - Mitee-Bite Introduces the SIDE-LOC to it's Range of ID Xpansion Clamps December-2006 - Mitee-Bite Products OK-VISE Clamp - Small in Size, high in clamping force October-2006 - Mitee...

http://www.miteebite.com/pr.html

Website Links: