Products & Services

• • Patchers
  • Loaders
  • Sprayers
  • Potholes
  • Emulsions
  • Systems
  • Asphalt
  • Patching
  • Manufacturers
  • Pot
• • Holes
  • Repair
  • Equipment
  • Truck Mounted
  • Type
  • Pump
  • Compressor
  • Asphalt Patcher
  • Unibelt
  • Unitized

Web Result

Model BH-205-28

PATCHERS LOADERS SPRAYERS DUMP BODIES DEALERS CONTACT US EMULSION SPRAYER - SPECIFICATIONS Model BH-205-28 EMULSION SPRAY UNIT Emulsified Asphalt spray and storage system mounted on Truck chassis for applying tack coat. TANK Two compartment tank. Storage capacity 177 gallon emulsion and 28 gallon solvent. 10 gauge steel with the bottom reinforced. 6 curbside filler cap. Tank dimension 72 W x 24 L...

http://www.pblcorp.com/Sprayers_BH20528.html

Model 215

PATCHERS LOADERS SPRAYERS DUMP BODIES DEALERS CONTACT US Dump Body Features Full depth corner posts Pockets for extension sideboards are standard Strong tailgate chains furnished as standard Easy acting tailgate control, positive acting lower hinge hook All steel tailgate hardware Provision for Fed 108 lights Enclosed rear corner posts Heavy duty construction Air tailgate control Cab shield 12/14 ...

http://www.pblcorp.com/DumpBody_215.html

Model BH-153-21

PATCHERS LOADERS SPRAYERS DUMP BODIES DEALERS CONTACT US EMULSION SPRAYER - SPECIFICATIONS Model BH-153-21 EMULSION SPRAY UNIT Emulsified Asphalt spray and storage system mounted on Truck chassis for applying tack coat. TANK Two compartment tank. Storage capacity 130 gallon emulsion and 20 gallon solvent. 10-gauge steel with the bottom reinforced. 6 curbside filler cap. Tank dimension 72 W x 16 L...

http://www.pblcorp.com/Sprayers_BH15321.html

Model 420-PT

PATCHERS LOADERS SPRAYERS DUMP BODIES DEALERS CONTACT US TRAILER EMULSION SPRAYER - SPECIFICATIONS Model 420-PT These specifications describe a trailer mounted oil distributor unit which is used for patching with hot asphalt or heated cold mix. TANK Rectangle or round cross section with 400 gallons. All seams welded. Shell and surge plates made of 10 GA steel. 1 1/2" overflow pipe extending up int...

http://www.pblcorp.com/Sprayers_420PT.html

Model 220-PT

PATCHERS LOADERS SPRAYERS DUMP BODIES DEALERS CONTACT US TRAILER EMULSION SPRAYER - SPECIFICATIONS Model 220-PT These specifications describe a Trailer Mounted Emulsion and Cutback Sprayer. TANK Round Cross section, 200 gallon. 10 GA HR Steel Shell, 10 GA HR Steel flanged ends. 6" Fill Opening hinged. 2" Drain plug. 6 Gallon Tank for Flushing. 10 Gallon Waste Recovery Tank. Re-Circulation. Basket ...

http://www.pblcorp.com/Sprayers_220PT.html

Website Links: