Products & Services

• • Fluid Power Pumps And Motors

Web Result

Noise Levels

TORPEDO PUMP Noise Levels The TORPEDO PUMP was originally designed for clients requesting LOW NOISE LEVELSin R.O. FEED PUMPS. The Hewlett Packard Company (in California) was operating their R.O. Systems in their facility's basement, below the production floors. The noise from the old pumps were causing problems with the workers on the production floors. We built our first TORPEDO PUMPS to solve th...

http://www.torpedopump.com/webdoc6.htm

Motor Efficiency

TORPEDO PUMP Motor Efficiency There are some VERY POSITIVE BENEFITS to using the TORPEDO PUMP with submersible motors. The TORPEDO PUMP uses SUBMERSIBLE MOTORS manufactured specially for us in ALL STAINLESS STEEL CONSTRUCTION. These motors are typical of the motors that are used in DEEP-WELL applications all over the world. When you put a (well pump) motor 1500 feet below the ground, you don't wan...

http://www.torpedopump.com/webdoc5.htm

Efficiency Calculator...

TORPEDO PUMP Efficiency Calculator for Retrofits EXISTING PUMP Determine the brake horsepower of the existing pump to be replaced. This value can be obtained from the manufacturer's pump performance curves for the specific pumping condition. NEW TORPEDO PUMP Determine the brake horsepower of the TORPEDO PUMP by using the TORPEDO PUMP performance curves in the Pump Selection, Curves, Dimensions sec...

http://www.torpedopump.com/webdoc8.htm

Product Information

TORPEDO PUMP Product Information PUMPS UNLIMITED manufactures the TORPEDO PUMP (high efficiency Reverse Osmosis Feed Pump), currently the most-specified high-pressure pump for REVERSE OSMOSIS FEED APPLICATIONS. Our TORPEDO PUMP has a very high efficiency (nominal 72%), due to its multi-stage "turbine" design, and it "pays for itself" in lower energy consumption. Not only will your utilities bills ...

http://www.torpedopump.com/webdoc1.htm

TORPEDO PUMP

TORPEDO PUMP Specifications 1.0 R.O. SYSTEM FEED (CHARGING) PUMP 1.1 Operating Ranges The feed pump shall be available in sizes to accommodate design flows from 1 to 1200 gpm with discharge pressures up to 822 psi (1900 feet). 1.2 Feed Pump Design The feed pump shall be a high efficiency unit designed to meet the maximum pressure and flow conditions, with minimum brake horsepower required. 1.3 Fee...

http://www.torpedopump.com/webdoc10.htm

Website Links: