rigibore ltd - standard and bespoke special boring bars, iso cartridges, micron-adjustable boring units (mbu), ufp cartridges, and carbide inserts.

Products & Services

• • Well Machine
  • Taps
  • Broaching Tools
  • Tool Bar Of Machine Tool
  • Tapping Machine Tool
  • Broaching And Boring Machine Tool
  • Portable Boring Machine
  • Bar Machine
  • Boring Bars
  • Attachment Tools
  • Punching Machine
  • Punchings
  • Machine Taps
  • Portable Machine
  • Engineering Machinery
  • Tap For Machine
  • Portable Tools
  • Bar Boring Tool
  • Equipment
  • Tools For Machines
  • Machine Equipments
  • Boring Tool Bar
  • Boring Machines
  • Broaching And Boring Machine
• • Boring Tools
  • Plant
  • Tool Bar
  • Bar Equipment
  • Dies
  • Boring Bar Tool
  • Tools
  • Portable Bars
  • Machine Tool Bar
  • Plant Equipment
  • Machine Tool Equipment
  • Taps And Dies
  • Broaching Machine
  • Bars
  • Machinery
  • Boring
  • Well Engineering
  • Tapping Machine
  • Boring Equipment
  • Tools Of Machine Tool
  • Precision Tool
  • Machines And Tools
  • Equipment Machine

Web Result

Status Code 402: Information and Recovery Procedure

Status Code 402 Source O8506 Program Message or Meaning e402 TOOL COMPENSATION NOT CONFIRMED Description Macro O8506 queried the AEI. The response was that the tool acted upon the compensation command, but the AEI was unable to receive a final confirmation that the process completed successfully. It is likely that the tool was compensated successfully. Recovery Procedure No action required. Versio...

http://www.rigibore.com/ActiveEdge/StatusFiles/Status402.html

Cartridge Replacement Procedure

Cartridge Replacement Procedure 1 Undo the two M5 x 18 cap head screws securing the cartridge to the bar. Release the screw at the rear of the cartridge first. 2 Remove the elastomeric strip from the cartridge pocket. 3 Make sure the connector slot is clean and free from debris. If necessary, clean the electrical contacts with a cotton bud. Do not use abrasives 4 Make sure the cartridge pocket is ...

http://www.rigibore.com/ActiveEdge/CartridgeReplacementProcedure/CartridgeReplacementProcedure.html

Status Code 404: Information and Recovery Procedure

Status Code 404 Source O8506 Program Message or Meaning e404 UNUSEABLE AE TOOL Description Macro O8506 queried the AEI after a compensation command was successfully sent to the tool. This response indicates that the tool was unable to compensate the tool. Recovery Procedure Physical inspection of the tool is required. Select the appropriate AEI page in ActiveNet and review the relevant TOOL ID rec...

http://www.rigibore.com/ActiveEdge/StatusFiles/Status404.html

Status Code 401: Information and Recovery Procedure

Status Code 401 Source O8506 Program Message or Meaning e401 TOOL COMPENSATION FAILED Description Macro O8506 queried the AEI. The response was that the tool did not confirm receipt of a compensation command. The compensation process did not start. Recovery Procedure Make a note of this STATUS code (eXXX), the bar's tool ID, the cartridge serial number and the AEI serial number (AEIxxxxx), and wha...

http://www.rigibore.com/ActiveEdge/StatusFiles/Status401.html

Rigibore ActiveNet

Tool Battery Replacement The contents of battery replacement kit AE-BPK02 are shown below. Two spare screws are provided as replacements, if required. Do not mix partially discharged batteries with new. To replace the batteries in the tool, first remove the old batteries by undoing the four M4 countersunk socket screws that secure the battery cover plates to the front of the yoke. Remove the cover...

http://www.rigibore.com/ActiveEdge/BatteryReplacement.html

Website Links: