Products & Services

• • Manufactures Heads
  • Tips
  • Reamers
  • Wear Pads
• • Multiple Edge Drills
  • Drill Bars
  • Full Hole & Pull Bor

Web Result

Full Hole

Full hole heads are available for 1-1/4" to 1-5/8" hole sizes. They offer the economy of replaceable tips and wear pads. Can also be used in blind hole applications. [TrepanTools,Inc.] [AboutUs] [Products] [Educational] [ContactInfo] ...

http://www.trepantools.com/Products/Full_Hole/full_hole.html

Special Tips

Special tips are stocked that cut down on the core size. These tips fit the standard heads for " tips; but cut 7/8" or 1" wide. This reduction of the core is critical in material that will not yield a tight chip. They are also helpful in small diameter holes, such as 1-3/4", where the core causes problems by twisting into a birds nest, resulting in blockage of the chip flow. [TrepanTools,Inc.] [A...

http://www.trepantools.com/Products/Special_Tips/special_tips.html

Reamers

These tools offer a fast method to enlarge and existing hole or to improve the finish after trepanning. They offer the economy of fitting in the standard trepan head no special tooling. The 10 degree reamer, also called wipers are very useful to clean out after a tip breaks. Many problems arise when a tip breaks and carbide is embedded in the material being drilled. These 10 degree reamers wipe ...

http://www.trepantools.com/Products/Reamers/reamers.html

Website Links: