Tipton, Inc., Joe
(972) 271-6666
2202 Executive Dr.
Garland, Texas,
USA
75041
- Year Established:
- 1979
Products & Services
-
- Blowers And Fans
Web Result
- Maintenance & Trouble Shooting
- Routine Maintenance In order to insure that your Filter/Clone Dust Control System is operating to its design specifications, the following visual inspections should be performed on a periodic basis. A. Verify that the dropout hose located at the bottom of the dust collector is securely fastened to the dropout chute. This hose should be free of any holes and should form a tight seal during the peri...
- How does it work?
- BASIC OPERATION The basic operation of the Filter/Clone Dust Control System can be described as follows: 1. A vacuum is induced in the Housing (1), the Suction hose, and the Pickup Pot (3) by the Blower (2). Dust and cuttings which are forced out of the drilled hole by blow air are captured at the pickup pot and conveyed to the Tangential Inlet (4) of the housing. 2. Heavy particles are held again...
- Trouble Shooting
- Trouble Shooting If, upon inspection of your dust control system, it is obvious that the unit is not operating properly, the following discussion should help you to trouble shoot the problem. All problems with the Filter/Clone Dust Control System can be isolated through the use of a single test instrument, namely the water manometer. A water manometer is a very simple device consisting of a clear ...
Website Links:
Own this business?
Request to update the information