Products & Services

• • Reducing Fittings
  • Elbow Tube To Hose
  • Elbow Pipe To Hose
  • Tee Fittings
  • Reducing Pipe Fittings
  • Railing
  • Corners
  • Flange Pipe Clamp
  • Single -metallic Band Saw Blades
  • Clamp Coupling
  • Tee Flange To Pipe
  • Adjustable Base
  • Reducing Pipe
  • Swivels
  • Combination
  • Tee Pipe Fittings
  • Elbow Pipes
  • Degrees Tee
  • Tee Tube To Hose
  • Tube Bases
  • Corner Tube
  • Flange Elbow
  • Engineering Pipe
  • Tee Pipe To Hose
  • Tee Flange To Tube
  • Elbow Flange To Pipe
  • Side
  • Clamps
  • Tee Pipe To Tube
  • Pipes' Fittings
  • 90 Degree Reducing Tee
  • Pipe Flanges
  • Flange Tee
  • Degree Reducing Tee
  • Adjustable Swivel
  • Corner Clamps
  • Sections
  • Vertical Clamp
  • Tee Flange To Hose
  • Elbow Pipe Fittings
  • Bends: Pipe Tube
  • Hoses
  • Elbow Pipe To Tube
  • Elbow Hose
  • Hose And Pipe Fittings
  • Flange Elbow Pipe
  • Engineering Pipe Fittings
  • Fluid Pipe
  • Flange Clamp
  • Elbows Degrees
  • Tube Tees
  • Degree Reducing Elbow
  • Pipe Base
  • Reducing Elbows Degrees
  • Sockets
  • Combination Socket
  • Elbow Swivel Flange To Hose
  • Corner Tee
  • Base
  • Reducing Tee Fitting
  • Tee Flange To Tube To Hose
  • Elbows Fitting
  • Clamp Tee
  • Double Sockets
• • Elbow 90
  • Tube Elbows
  • 90 Degrees Tee
  • Flange Tube
  • 60 Degree Tee
  • Reducing
  • Elbow Tube
  • Elbow Flange To Hose
  • Clamp Elbow
  • Tee Pipe
  • Support
  • Tube Fittings
  • Pipe And Pipe Fittings
  • Flange Fittings
  • Tee Flange
  • Tees
  • Tee Hose
  • Pipe Clamps
  • Pipe Accessory
  • Fluid Tube
  • Flange Reducing Pipe
  • Elbows
  • Tubular Pipe
  • Hose Tee
  • Pipe Tees
  • Tubular Fittings
  • Engineering Fittings
  • Pipe Elbows
  • Crossovers
  • Well Engineering
  • Elbow Flange To Tube
  • Tee Pipe To Tube To Hose
  • 90 Elbow
  • Flange Pipe Fittings
  • Pipe Fittings Accessory
  • Hose Fittings
  • Fittings Pipe
  • Degree Short Elbow
  • Single -phase Diesel Generating Set
  • Fittings
  • 90 Degree Elbow
  • Hose Clamps
  • Flange Accessories
  • Swivel Pipe
  • Tee Tube
  • Reducing Tee
  • Elbow Flange
  • Flanges
  • Flange Pipe
  • Reducing Clamp
  • Degrees Elbow
  • Clamp Corner
  • Elbow Swivel Flange To Tube
  • Accessory
  • Shorts
  • Reducing Elbows
  • Couplings
  • Base Pipe
  • Reducing Elbow Pipe
  • Well Pipe
  • Clamp Hose
  • Flange Short Tube
  • Well Tube

Web Result

Tubeclamps

3 back 148 SHORT SWIVEL TEE The photo on the fittings page shows 2 fittings. The 148 fittings are used in pairs. Typical use is on level guardrails to create a corner at other than 90 with an upright. Creates angles on plan between 85 & 235. When using the 148 fitting the top of the tube needs to be closed using a 133 end cap. TYPE Tube Size a Kg 148A 26.9 65 0.31 148B 33.7 66 0.32 148C 42.4 7...

http://www.tubeclamps.co.uk/editable_pages/fittings/148.htm

Tubeclamps

3 back 124 VARIABLE ELBOW Variable elbow for connecting two tubes together at angles between 15 & 60 on guardrails or handrails. This fitting avoids the need to bend tube. TYPE Tube Size a b c d Kg 124B 33.7 65 60 13 50 0.41 124C 42.4 80 66 16 55 0.68 124D 48.3 95 75 17 55 0.89 ...

http://www.tubeclamps.co.uk/editable_pages/fittings/124.htm

Tubeclamps

3 back 101 SHORT TEE Typical use on straight and level guardrails to connect the upright to the top rail or the end or mid rail to the upright. Tubes cannot be joined inside a 101, to join tubes inside the fitting use a 104. Normally used in conjunction with the 125 fitting. TYPE Tube Size a Kg 101A 26.9 40 0.19 101B 33.7 48 0.32 101C 42.4 60 0.44 101D 48.3 67 0.58 101E 60.3 86 0.76 ...

http://www.tubeclamps.co.uk/editable_pages/fittings/101.htm

Tubeclamps

3 back 133 PLASTIC END CAP Plastic end cap to seal the end of open tubes. This fitting is a frictional fit only for a permanent fix a suitable adhesive should be used. TYPE Tube Size Kg 133A 26.9 0.008 133B 33.7 0.010 133C 42.4 0.010 133D 48.3 0.016 133E 60.3 0.024 ...

http://www.tubeclamps.co.uk/editable_pages/fittings/133.htm

Tubeclamps

3 back 129 ADJUSTABLE TEE Typical use on steeper slopes or stairs as a tee connector with an angle between 30 & 60 with the upright remaining vertical. This fitting does not allow the through tube to be joined inside the fitting. Normally used in conjunction with the 130 fitting. TYPE Tube Size a Kg 129B 33.7 74 0.58 129C 42.4 85 0.87 129D 48.3 102 0.90 ...

http://www.tubeclamps.co.uk/editable_pages/fittings/129.htm

Website Links: